METAL BODY REPAIR - OD1653 - LESSON 1/PE 1
LESSON 1.
PRACTICAL EXERCISE - ANSWERS
1.
a.
The purpose that each is intended to be used for is different.
b.
The roof panel assembly.
c.
Trunk.
d.
(1)
Channel stock
(2)
Angle
(3)
T-stock
(4)
Z-stock
(5)
Tubing
(6)
I-beam
(7)
Flat plates
(8)
A combination of any two or more of the above stocks
e.
(1)
Wire brush
(2)
Grinding wheel
f.
The main part or center of the frame is dropped down between the front
and rear wheels.
g.
No.
h.
Beat.
i.
Rivets are used because of their structural strength and their ability
to give with the road condition.
j.
(1)
Moldings
(2)
Floor mats
(3)
Armrests
(4)
Head linings
(5)
Door trim pads
(6)
Weather stripping
k.
Combat type vehicle windshields are held together by a metal frame and
sheet metal and machine screws, and are attached to the body by hinges
and brackets.
l.
Body panels.
m.
Pick hammer.
52
Previous Page
