Figure 1-18.
Vehicle Cable Continuity Check.
In order to familiarize you with the format of the repair instructions for
the G/VLLD, this lesson provides the example below. All repair instructions
in the TM follow a similar format.
RECEIVER CIRCUIT CARD A2A4 REPLACEMENT
CAUTION
Do not touch optical surfaces of the transceiver
assembly A2 with bare hands.
If external optical
surfaces are dirty, clean per TM 9-1260-477-12.
Receiver circuit card A2A4 is electrostatic sensitive.
Protect this card by wearing a grounding wristband
when probing.
Handling and/or installation of
individual cards should be performed at a static-free
work station.
This card should be anti-static
packaged during handling or storage.
48
OD1722
Previous Page
