USE/CARE OF HANDTOOLS & MEASURING TOOLS - OD1621 - LESSON 2/TASK 2
FIGURE 88.
SHARPENING A WOODWORKER'S CHISEL.
6 After a few strokes, a burr, wire edge, or feather edge is
produced. To remove the burr, first take a few strokes with the flat side
of the chisel held flat on the fine grit side of the stone. Be careful not
to raise the chisel even slightly and avoid putting the slightest bevel on
the flat side, otherwise, the chisel must be ground until the bevel is
removed.
115
Previous Page
