M2/M3 BFV ENGINE STARTING/CHARGING SYS - OD1603 - LESSON 1/TASK 1
FIGURE 14.
REPLACING WIRING HARNESS
3W1 (CONTINUED)
Step 8.
Remove plug 3W1P9 (4a)(figure 18 on page 38) from the fuel pump 3A1B2
(5a). Remove the clamp (1) from wiring harness 3W1 (2) by removing the locknut (3)
and screw (4) from two clamps (1, 5). Discard the locknut.
Step 9.
Remove the clamp (6)(figure 19 on page 39) from wiring harness 3W1 (2)
by removing the locknut (7), screw (8), and clamp from the
34
Previous Page
