4.
When operating the transmission in the reverse, which of the
following is the gear ratio?
A.
1.04:1.
B.
2:34.1.
C.
4.16:1.
D.
6.62:1.
5.
Bosses for mounting the transmission to the maintenance stand
are contained in which of the following assemblies?
A.
Left housing assembly.
B.
Right housing assembly.
C.
Center housing assembly.
D.
Left-end and right-end cover assemblies.
6.
The input speed rating for the X200-4 transmission is?
A.
1400
rpm.
B.
2100
rpm.
C.
2800
rpm.
D.
3500
rpm.
7.
With the vehicle in operation, the lockup clutch engaged and
then locked the turbine to the torque converter housing.
What
is the benefit of this action?
A.
Increased slippage.
B.
Reduced vehicle speed.
C.
Reduced vehicle power.
D.
Increased fuel mileage and an increase in transmission life
due to elimination of slippage.
8.
What is the purpose of placing desiccant in the transmission
shipping/storage container?
A.
Absorb moisture.
B.
Equalize pressure.
C.
Equalize temperature.
D.
Lubricate the container seal.
9.
The stall
of
the
converter
is
which
of
the
following?
A.
2.02:1.
B.
3.32:1.
C.
4.23:1.
D.
4.75:1.
29
OD1714
Previous Page
