LESSON
PRACTICE EXERCISE
ANSWER KEY AND FEEDBACK
Compare your answers to the following solutions. If you answered any
item incorrectly, review the page(s) and paragraph(s) referenced
until you understand this instruction.
Item
Correct Answer and Feedback
1.
B.
Input quill shaft.
The input gear train, range input gears, and the bevel gear
assembly are all on the output side of the torque convert.
The torque convert attaches to the quill shaft at one end,
and the engine attaches to the quill shaft at the other
and.
The engine uses the quill shaft to transmit the
torque it develops to the transmission.
(pages 1 and 2,
para 1a)
2.
C.
Center section.
The input module is one of the two major modules of the
transmission that houses the lockup clutch and torque
converter.
The center module consists of the center
section and the left and right output housings.
(page 4,
para 1)
3.
C.
Improving speed range coverage.
Providing a fluid coupling and multiplication of torque are
functions of the torque converter.
The engine drives the
pump, not the turbine.
When converter lockup occurs, it
gives
the
transmission
better
performance,
including
improved speed range coverage. (page 6, para 2)
4.
C.
Converter turbine speed.
The engine interstage pressure modulates
the actual shift
point, from range to range, of the
transmission in
conjunction with engine speed. The speed
of the converter
turbine determines the point at which the
converter lockup
clutch engages. (page 8, para 3)
65
OD1710
Previous Page
