100.
When splines have score marks and nicks, they are repaired by using a
a.
fine stone.
b.
fine mill file.
c.
fine sandpaper.
101.
The minimum time between each cranking cycle, during performance tests,
should be at least
a.
1 minute.
b.
2 minutes.
c.
3 minutes.
102.
What performance parameters are measured during the NO LOAD test?
a.
RPM and current
b.
RPM and voltage
c.
RPM and torque
103.
What performance parameters are measured during the STALL TORQUE test?
a.
Voltage and current
b.
Voltage and torque
c.
Torque and current
104.
What important precaution is observed to prevent body injury during the STALL
TORQUE test?
a.
Proper test stand cable connections
b.
Blocking of the yoke shifting lever
c.
Balance scale to zero pounds reading
105.
During assembly of the Prestolite starter, which is installed in the frame
assembly first?
a.
Armature
b.
Brushes and holder
c.
Intermediate housing
OS 010, 6-P31
Previous Page
