Lesson 3/Learning Event 4
FIGURE 56. TRANSDUCER CABLES W4.
Used as extensions to connect the VTM to a pressure transducer, pulse tachometer, current probe,
or ignition adapter cable. Two transducer cables can be joined using connector adapter, TK item
FIGURE 57. POWER CABLE W5.
Used to power the VTM when cable W1 is not being used. Cable W5 is divided into two leads
with color-coded clips, red for E1 and black for E2. Battery clips E1 and E2 are attached to a
vehicle/equipment battery or a 9- to 32-volt 4A regulated power supply. Never connect the VTM to
a battery charger unless it is also connected to a battery, or damage to the VTM may result.