WELDING OPERATIONS I - OD1651 - LESSON 1/TASK 1
LESSON 1
ELECTRODES CLASSIFICATION AND
INTENDED USES; AUTOMOTIVE WELDING PROCESSES,
MATERIALS, AND IDENTIFICATION PROCESSES;
METHODS OF DESTRUCTIVE AND NONDESTRUCTIVE
TESTING OF WELDS AND TROUBLESHOOTING PROCEDURES;
TYPES AND TECHNIQUES OF JOINT DESIGN; AND
THE THEORY, PRINCIPLES, AND PROCEDURES OF
WELDING ARMOR PLATE
TASK 1.
Describe the processes for identifying
electrodes by classification, and intended
uses; and the automotive welding
processes, materials, and identification
processes; and the types and techniques of
joint design.
CONDITIONS
Within a self-study environment and given the subcourse text, without
assistance.
STANDARDS
Within three hours
REFERENCES
No supplementary references are needed for this task.
1.
Introduction
Welding is one of the most important functions performed in both an
intermediate direct support (IDS) and intermediate general support
(IGS) maintenance company.
Experience gained during the second world
war revealed that many broken parts can be welded and put back into
service, thus often saving the expense of fabricating or purchasing a
new piece of equipment.
As a result of this experience, a service
section containing a metalworking shop with welding capabilities is now
established within these maintenance organizations.
1
Previous Page
