BANDSAW OPERATIONS - OD1646 - LESSON 2/TASK 2
LESSON 2
BANDSAW MAINTENANCE AND TROUBLESHOOTING
TASK 2.
Describe the procedures for troubleshooting the bandsaw.
CONDITIONS
Within a self-study
environment
and
given
the
subcourse
text,
without
assistance.
STANDARDS
Within two hours
REFERENCES
No supplementary references are needed for this task.
1.
Introduction
Lesson one provided a description of the uses of a bandsaw machine and the
proper methods for operating a vertical bandsaw machine. In the first task
of lesson two, maintenance procedures for three different bandsaw machines
were discussed. A thorough working knowledge of operational and maintenance
procedures
is
required
before
troubleshooting
procedures
can
be
accomplished.
This task will discuss the procedures used for isolating
malfunctions (troubleshooting) for these three models of bandsaw machines.
2.
General Troubleshooting
When a problem occurs in equipment, from the failure of either a mechanical
or electrical component, it is necessary to understand how to isolate the
cause of the problem so that it can be fixed.
Troubleshooting is the
logical process used to isolate the cause of a malfunction by identifying
the symptoms, isolating the fault so that corrective action can be taken.
65
Previous Page
