BANDSAW OPERATIONS - OD1646 - LESSON 1/PE 1
c.
The _______________________ attachment twists the bandsaw blade so
that large or long workpieces that would not normally clear the bandsaw
machine column can be cut.
d.
The _______________________ attachment
permits
the
cutting of
true
circles, either internally or externally.
e.
The ________________________ helps in making even, straight cuts.
4.
Second Requirement
Define or describe the following:
a.
Kerf
b.
Raker setting
c.
Pitch of teeth
d.
Annealing
e.
Bastard-cut files
5.
Third Requirement
During the annealing process, the welder and blade have been properly set
up. Describe the annealing process on the model 2612-1M bandsaw machine for
(a) carbon blades and for (b) Dart blades.
51
Previous Page
