Lesson 3/Learning Event 4
FIGURE 32. TK ITEM 16 - 1/8- INCH PIPE PLUG.
Used to plug female pipe threads of 1/8-inch pipe street tee to allow its use as an elbow or a
straight fitting.
FIGURE 33. TK ITEM 17 - PRESSURE TRANSDUCER.
Used to measure cylinder compression, oil, fuel, and other pressures in excess of 25 PSI.
FIGURE 34. TK ITEM 18 - - INCH MALE CONNECTOR.
Used to connect to 5/16-inch inverted flare fitting as found on gas lines.
91
Previous Page
