113.
To properly lubricate the varidrive motor rear bearing, how much grease, in
cups, must be forced through the bearing?
a.
1/4
b.
1/2
c.
1
114.
How often should the oil be drained from the gearcase under normal conditions?
a.
W (weekly)
b.
S (semiannually)
c.
A (annually)
115.
What is used to clean the top of a lead-acid battery?
a.
Carbon tetrachloride
b.
Baking soda and water
c.
Drycleaning solvent (SD)
116.
What identifies a battery adapted for use in tropical climates?
a.
White dot about 1 inch in diameter on top of the battery
b.
Red band about 2 inches wide around the battery
c.
Yellow vent plugs
117.
What is the potential, in volts, across a 2,000-ohm, 50-microampere meter
movement when it is reading full scale?
a.
0.1
b.
2.5
c.
4.0
118.
What value resistor (ohms) must be placed in series with a 2,000-ohm, 50-
microampere meter movement to make full scale deflection representative of a
2.5VDC input?
a.
998K
b.
198K
c.
48K
119.
What value shunt resistor (ohms) must be used with a 50 microampere, 2,000-
ohm meter movement to make full scale deflection representative of a 20-
ampere input?
a.
0.025
b.
0.010
c.
0.005
120.
Which control is used to set the correct battery charging voltage?
a.
Battery charger timer
b.
Battery charger control
c.
Battery voltage selector
OS 010, 7-P19
Previous Page
