• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print

Home > Ordnance Documents and other related manuals > > Figure 7. Tee joint Edge Preparation
Edge Joint
Figure 8. Groove Welds

Welding Operations, I
Page Navigation
  19    20    21    22    23  24  25    26    27    28    29  

WELDING OPERATIONS I OD1651 - LESSON 1/TASK 1
FIGURE 7.
TEE JOINT EDGE PREPARATION.
c.  Types of Welds.
The type of weld used will determine the
manner of seam, joint, or surface preparation.  A listing of the
different welds used is provided in the following subparagraphs.
(1) Groove Weld (figure 8 on the following page).
These are
welds that are made in a groove between two members to be joined.
In this position, the axis of the weld lies approximately in a
horizontal plane and the face of the weld lies approximately in a
vertical plane.
(2) Surfacing Weld (figure 9 on page 25).
This type weld is
composed of one or more string or weave beads deposited on an
unbroken surface to obtain desired properties or dimensions.
23






Western Governors University

< Previous Page
Index ^
Next Page >

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.