o Next remove the nine strap assemblies (Item 12) by removing one
screw (Item 13), one lockwasher (Item 14), one flat washer (Item
15), and one strap (Item 16) from each of the strap assemblies. You
can now remove harness 12351500 and then install the strap
o As your final step in removal of electrical wiring harness 12351500,
remove four strap assemblies (Item 17) located on the left side of
the drivers compartment, strap assembly (Item 18), seven strap
assemblies (Item 19) 13 strap assemblies (Item 20), and 12 strap
assemblies (Item 21).
Items 18 through 21 are located on the
forward bulkhead of the crew compartment. Separate harness 12351500
from the other harnesses and remove it from the vehicle. After the
harness is removed, reinstall each strap assembly.
o The process to install electrical wiring harness 12351500 is the
reverse of the removal procedures.
Figure 37. Engine AFES Electrical Wiring Harness 12351500.
(Figure 37 continued on following page)