o Remove the bracket assembly (Item 33) from the mount (Item 12) by
removing four screws (Item 34) and four lockwashers (Item 35).
o Now you may remove the bolt (Item 36), lockwasher (Item 37), flat
washer (Item 38), and clamp (Item 39).
With these items removed,
disconnect the wiring harness.
Be sure to discard the old
When you complete the inspection of the engine AFES cylinder bottle bracket
straps, brackets, and mounts, correct any faults you may have found. You
may now install the removed components using the reverse procedure of
Figure 20. Engine AFES Cylinder Bottle Bracket Straps,
Brackets and Mounts (Vehicles 345 and above).