BANDSAW OPERATIONS - OD1646 - LESSON 2/TASK 1
the oil level
of the transmission (figure 42) as
required. After the first month of operation and at least every six months
after that, the transmission should be drained, flushed, and refilled. Fill
the transmission to the top of the fill pipe, but do not overfill. Use high
quality, rust and oxidation inhibited, medium hydraulic and general purpose
industrial oil, ASTM grade number 315.
Check for seal leaks around the
Any rough operation, vibration, loud or unusual noises should be
investigated immediately. Since installing a new
MODEL 2614-1 DRIVE COMPARTMENT.