• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print

Home > Ordnance Documents and other related manuals > > Saw Guides
Variable Speed Pulley
Figure 40. Belt Drive System - Model 2612 -1M.

Bandsaw Operations
Page Navigation
  54    55    56    57    58  59  60    61    62    63    64  

BANDSAW OPERATIONS - OD1646 - LESSON 2/TASK 1
sideways as well as rotates, is lubricated by a wick which is immersed in
oil.
This oil travels through the hollow shaft from the oil cup.
The
variable speed pulley faces should be checked for scoring which could damage
the belts.
FIGURE 39.
VARIABLE SPEED PULLEY - MODEL 2612-1M.
CAUTION
Do not over lubricate the pulley.  Excess lubrication
could coat the belts and cause slippage.
d.
Saw Guides.  The saw guide bearings are replaced by removing the snap
ring and pulling out the bearing cap and shaft.  The bearings are installed
with a light press fit, and can be easily
59






Western Governors University

< Previous Page
Index ^
Next Page >

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.