• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print

Home > Ordnance Documents and other related manuals > > Figure 10. Unload/ Stow 25mm AP Ammo.
Procedural Steps for Unloading/Stowing 25mm AP Ammo.
Procedural Steps for Unloading/Stowing 25mm AP Ammo. - Continued - Od16090069

M2/M3 Bradley Fighting Vehicle: Turret
Page Navigation
  56    57    58    59    60  61  62    63    64    65    66  

M2/M3 BRADLEY FIGHTING VEHICLE: TURRET - OD1609 LESSON 1/TASK 2
right.
Put upward pressure on the 14mm ratchet wrench, and pull the AP release
handle to the left.  Hold the AP release handle to the left, while moving the 14mm
ratchet wrench to the straight down position.  Let go of the AP release handle and
turn the 14mm ratchet wrench to the left until the AP release handle pops back into
place.  Repeat the step until only two rounds are visible in the AP feed chute.
Step 10.
Move AP ammo onto the loading rail by reaching into the AP access area
and grasping the round nearest the AP forwarder (figure 10).  Pull the round onto
the loading rail while releasing the last two rounds from the AP feed chute.
Remove the 14mm ratchet wrench from the shaft of the AP forwarder.
FIGURE 10.
UNLOAD/STOW 25MM AP AMMO.
Step 11.
Pull the ammo belt from the AP ammo can by stretching and placing the
ammo belt on the vehicle floor.
61






Western Governors University

< Previous Page
Index ^
Next Page >

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.