M2/M3 BFV: FIRE CONTROL SYSTEM - OD1608 - LESSON 2/TASK 1
CONTROLLABLE INTERFACE ASSEMBLY.
(4) Test Cables and Adapters.
The test cables and adapters
assembly (figure 45 on the following page) consists of a shorting
Preparing the STE for Operation
Before the STE can be used effectively, it must be inspected and
hooked up to the vehicle.
A self-test must then be performed to
ensure the STE is working properly.
For the self-test to succeed,
the test set must be operated in a temperature environment between
+20 and +125 Fahrenheit.
An internal temperature sensing device
stops the operation of the test set outside these temperature limits.
Any component that cannot be repaired by straightening bent pins, or
by cleaning, should be turned in for replacement.