• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print

Home > Ordnance Documents and other related manuals > > Figure 37. Installing The Boresight Telescope.
TOW Launcher Boresighting Procedures.
Check the alignment of the boresight telescope reticle

The M2/m3 Bradley Fighting Vehicle: Fire Control System
Page Navigation
  41    42    43    44    45  46  47    48    49    50    51  

M2/M3 BFV: FIRE CONTROL SYSTEM - OD1608 - LESSON 1/TASK 5
FIGURE 37.
INSTALLING THE BORESIGHT TELESCOPE.
(12) The boresight telescope must now be installed in the TOW
launcher (figure 37).  Follow this procedure to install the boresight
telescope:
(a) Gently push the shank of the boresight telescope into the
TOW  launcher  until  it  is  seated.
The  shank  of  the  boresight
telescope is tapered.
Slide the shank into the TOW launcher far
enough so that the boresight telescope will hold its own weight.
(b) Turn the boresight telescope so that the eyepiece is at
the top.
(c) When the boresight telescope is in, hang a red streamer
on the boresight telescope.
46






Western Governors University

< Previous Page
Index ^
Next Page >

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.