Install the Flange to Hose Elbow (Reduction Gearbox).
this installation by sliding the elbow (1) on the hose (5).
Then place a new gasket (6) and the elbow on the housing (7)
and install and tighten the two bolts (4). Also tighten the
screw (2) on the hose clamp (3) (fig. 1-14).
Reduction Gearbox Flange to Hose Elbow.
Install the Forward Reduction Gearbox Tube Assembly.
the clamps (2 and 3) on the tube assembly (1) and place the
tube under the wiring harness (4) and tube assemblies (5).
Then join the tubes (6 and 1) by connecting the tube nut (7)
to the tube (fig. 1-15).
Forward Reduction Gearbox Tube Assembly,