• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print

Home > Ordnance Documents and other related manuals > > Lesson 1. Practical Exercise - Answers - Continued - OD16530060
Lesson 1. Practical Exercise - Answers - Continued - OD16530059
Lesson 2. Operations Required for Glass, Radiator, and Fuel Tank Repair

Metal Body Repair
Page Navigation
  49    50    51    52    53  54  55    56    57    58    59  

METAL BODY REPAIR - OD1653 - LESSON 1/PE 1
gg.
No. It should be hammered out before heat is applied.
hh.
Offset crosspeen.
ii.
Cold shrinking.
jj.
If the epoxy has not thoroughly cured, the body file will clog and
gouge the surface being worked on.
kk.
The process of tinning prepares a surface for receiving and holding
solder.
ll.
A light coat of oil.
mm.
Solder composed of 30 percent tin and 70 percent lead.
54






Western Governors University

< Previous Page
Index ^
Next Page >

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.