M2/M3 BFV: HULL POWER DIST SYSTEM - OD1606 - LESSON 2/TASK 1
FIGURE 37.
One of the
important uses for the TS-352B/U multimeter is to make do voltage
tests.
These tests are used to measure battery voltage, charging
system output voltages, and voltage drops at various test points.
Bad connections, poor wiring, and dirty switch contact points will
cause errors in voltages readings. To get accurate readings, measure
at the exact circuit points given in the electrical circuit
troubleshooting diagrams in the BFV TMs. Follow the procedures below
First, set the FUNCTION switch to DIRECT. Then plug the black test
lead into the OHMS -DC AC jack. Plug the red lead into the 50V jack
that is
50