Refer to para 5b(3)(h).
Opening the valve the full limit prevents leakage
around the valve stem.
A quarter turn clockwise on the handle for each
complete revolution gives the wheels a "bite" on the pipe until
the pipe is cut.
Refer to para 9c(2).
Refer to para 10b.
The automotive exhaust method is also considered
acceptable by military personnel. The two methods are considered
Refer to para 24c.
Refer to para 4d.
Refer to para 6b(6).
Refer to para 8b(3).
Refer to para 9b(l).
Refer to para 17e.
Refer to para 6e(3)(b).
Refer to para 6b(4).
The cape chisel is also used for cutting narrow
grooves and square corners.
Soda ash is used on other metals but not on aluminum.
Chlorinated hydrocarbons are not used at all.
The cutting oxygen pressure and cutting speed must
also be considered in order to make a neat cut.
Refer to para 17b.
Refer to para 30a(l).
Refer to para 3b(l).
Some other types of check valves are swing, disk,
and adjustable check.
Other special purpose pliers are brake spring, glass
holding and breaking, ignition and brake key, and snapring.
Refer to para 5a(3).
This type flame burns with a coarse rushing sound
and has a temperature of approximately 5.700F at the inner cone