increase the amount of load the variable load is connected in
CORRECT. If the transistor is forward biased it is said to be ON,
thus exhibiting a resistance approaching a short circuit. No
voltage can be developed across a short circuit.
Then clean with compressed air.
CORRECT. This is the most efficient means of troubleshooting the
ignition timing light.
CORRECT. This can be corrected by loosening the distributor
clamp and centering the distributor shaft.
You are checking the reverse polarity diode.
DA Pam 310-4 lists a complete index of DA supply catalogs.
The pulley output shaft couples between the driving head and
CORRECT. The contact screw adjusts the pressure against the pile,
thereby setting the minimum resistance of the carbon pile.
Restudy figure 5, the lubrication chart.
CORRECT. The internal regulator voltage adjustment is under the pipe
plug on the front housing.
CORRECT. To free the yoke cover the yoke pin in the pivot Joint
must be removed.
This is one of three field switches.
CORRECT. A stator assembly is loops of wire in a frame surrounding