Figure 33, 34, and 36
CORRECT. Remember Ohm s law and you can easily figure out DC
CORRECT. The resistance of a reversed biased diode approaches
an open circuit.
This action will put all new grease in the system.
CORRECT. When bench tested all external components to the
regulator circuit board have been checked. If under operating
conditions it does not regulate, then the regulator circuit board
has to be bad.
CORRECT. The function selector switch adapts the meter circuits to
several types of measurement.
CORRECT. A low ohm reading between a slipring and the shaft
indicates a grounded field winding.
The M146 is a semitrailer shop van.
*If your response is not listed CORRECT, refer to the indicated paragraph
or figure for the right answer.